A hail report sends facilities teams to the roof with two questions: what was struck, and did the strike change how that section sheds water? A mark on a metal panel or membrane is not automatically a leak, while a puncture at a seam or curb can be easy to miss from the ground. We map visible impacts, inspect the details around them, and compare affected material with an undamaged area. That record gives the owner a repair boundary instead of a roof-wide guess.
Send the storm date, roof plan, interior reports, access rules, and operating window. We will map impact conditions by section and document repairs, monitoring, and any testing that could change the scope.
Start with exposed edges, rooftop equipment, skylights, metal flashings, drains, and transitions between roof sections. Hail can bruise softer membrane, dent metal, fracture brittle accessories, or dislodge a detail without leaving a hole in the field sheet. We photograph each condition with enough context to find it again, then check whether seams, fasteners, coating, or flashing have opened. The National Weather Service reported golf-ball-size hail in Pearland on November 2, 1995; a current inspection should document any present impact by roof section.
Industrial and flex buildings along the State Highway 35 corridor bring equipment and service routes into the inspection. On a healthcare or office roof near SH 288, the roof walk also has to respect controlled access and occupied space. At Pearland Town Center, retail, hotel, residential, office, dining, and training uses can have different operating windows. The location changes how we plan access and protect people below; the affected assembly still determines whether a mark needs repair.
We identify the roof system and its condition before judging impact. On single-ply membrane, look for cuts, splits, displaced seams, punctures, and damage at penetrations. On metal, inspect panel ribs, fasteners, seams, ridge and edge details, and areas where a dent could hold water. Coated roofs need review for fractured coating, exposed substrate, or loss of adhesion. A commercial roof inspection records each finding and notes where equipment or unsafe access limited the view.
Check plastic domes, roof hatches, exposed sensor housings, and thin metal accessories as separate components. A damaged skylight or loose cover can create a safety and water-entry issue even when the membrane beside it remains intact. Record impact location, cracks, loose fasteners, and any opening below the component. If replacement parts require a vendor or lead time, mark that dependency so temporary protection and permanent closeout are coordinated.
Interior symptoms help focus the roof walk but do not establish the source by themselves. Note ceiling marks, active drips, equipment alarms, room use, and the time the condition appeared. Roof layers and framing can redirect an entry path, so interior symptoms need a roof-zone investigation. We compare the interior location with the roof plan and inspect drain paths, curbs, and nearby repairs. If concealed moisture is a concern, an infrared moisture survey may help map an area when the roof assembly and conditions are suitable.
Separate immediate water control from the permanent scope. Protect sensitive equipment and occupied areas below under the facility’s incident procedure. On the roof, temporary cover may be appropriate for an opening once access is safe and the material will not trap water or conceal a condition that needs documentation. Record who authorized the work, where it was placed, and which areas remain open. If water is entering outside normal hours, urgent roof response can be coordinated with the site contact and the operating window.
Pearland has a documented hail report and heavy-rain exposure, so temporary measures need a clear handoff before another weather period. measured 7.64 inches of rain at a location northeast of Pearland during Hurricane Beryl. That measurement describes one gauge, not conditions at every property, but it shows why an open roof defect needs a documented dry-in plan. A wind damage review can be useful when a storm also displaced edge metal or lifted a membrane detail.
A repair can stay local when the impact is isolated, the surrounding material is sound, and the patch method fits the roof system. A split seam, damaged flashing, cracked curb detail, or puncture may need its own treatment rather than a coating over the mark. If impacts are scattered or the membrane has broader age-related loss, compare targeted repair with a larger restoration plan. A puncture repair addresses an opening through the sheet; a flashing repair addresses a failed transition. They are related observations but different scopes.
A recover or replacement decision also depends on wet insulation, deck condition, drainage, attachment, and remaining roof height. Hail does not answer those questions. We identify what is visible, recommend testing only where it would change the repair boundary, and keep separate trades’ findings distinct. Pearland adopted the 2021 International Existing Building Code with local amendments for work on existing buildings. The project team should confirm the applicable permit and code requirements for its scope before construction proceeds.
Send the storm date, roof plan, interior reports, access rules, and operating window. We will map impact conditions by section and document repairs, monitoring, and any testing that could change the scope.
Keep a dated roof plan, wide and close photographs, the inspected roof sections, material identification, interior reports, temporary work, and the final repair method together. Distinguish impact marks from openings and from pre-existing wear. If an insurer or adjuster is involved, preserve the original condition images and identify any area changed during mitigation. A claim documentation service can organize observations and repair records without deciding coverage or cause.
For a visit, send the roof plan if available, the storm date, reported interior locations, access and safety rules, equipment restrictions, and the person who can release each roof section. At an operating site on SH 35 or in the SH 288 healthcare corridor, a defined access window helps coordinate tenants and service vendors. We return a section-by-section record that shows what needs repair, what can remain under observation, and which questions require further testing.
Hail evaluation should distinguish impact evidence from ordinary aging, foot traffic, and earlier repairs. Inspect representative roof sections and compare marked areas with a nearby reference of the same material, recording the location, size, and character of each observation. On metal, look at panel distortion, coatings, seams, and fasteners; on membranes, note cuts, punctures, bruising, or displacement without assuming that a visible mark has created a leak. Check flashings and rooftop equipment for related impact, and connect roof photos to any interior reports. If access or weather prevents a complete review, list the areas left open. The resulting report should describe observable conditions and recommended next steps, not promise that a storm caused every defect or predict what an insurer will decide.
No. The decision follows the assembly, impact location, and whether the material still performs. We inspect seams, flashings, fasteners, coating, and the area below before recommending a patch, broader repair, monitoring, or replacement review.
Often, the visible surface and accessible details can be photographed first. If moisture or a hidden layer could change the scope, we explain what a test opening or survey would establish and obtain the owner’s direction before proceeding.
Prioritize active water entry, loose components, exposed insulation, and damage above critical rooms. Once safe access is available, document the roof before temporary or permanent work changes the evidence.
It will not. Membrane, metal, foam, and coating systems show different impact patterns. The inspection identifies the installed assembly and tests for the failure mode that matters to its seams, surface, and attachments.
Share the reported storm date, leak locations, roof plan, known system, access instructions, tenant or equipment restrictions, and any photos taken from safe areas. Those details help set the first roof sections and operating window.
Call 555-555-5555 or send the property address, roof area and what you are seeing inside. We will set up a roof walk.
Schedule a hail-damage roof walk